Skip to main content

Ultramarines Super Heavy Falchion Tank


Finally finished the Falchion and another model in line with the core theme of the blog.  I picked this up back in March at the Forge World open day, with a view to have it finished before wider release... anyway...  it's done now.  The techniques involved are covered in the Glaive tutorial.  This time around I have tried to apply some of the pointers and tips passed on from Matt Murphy-Kane and Mark Bedford from not only Warhmmer Fest, but the FW open day to.






This is definitely the photo that kept me going this past week to get it finished - the 2 tanks sat beside each other.

One of the critique points on the Glaive (which I did enter into the painting comp that day) was perhaps too many streak and chips, to the point where stuff was getting lost in the all the other detail.  I have tried to rain it in a bit on this tank.  I think the weathering is a little down in quantity over the last tank, however the detail and number of rivets (they tested my patience...) is on the up meaning for some, it may be a little too busy still.


That said I am really please with the final finish.  The OSL is getting bolder as my techniques and colour management gets better (base layers and what is underneath really matters in what you see on the surface).  The burnt metal has come out really well again - I owe people a detailed tutorial on this.  I painted these barrels before that request came in so I will sort something soon - will just have to get another big tank (Fellblade and finish the collection???).


The XIII and Ultra stencil has come out perfectly and the Microset and Microsol has worked a treat on the transfers.  



They look great together.  Fingers crossed people think so tomorrow for AOP.  I have 18 hrs to complete a Stormtalon and then I am done.  Right now the Humbrol Gloss rattle can varnish is drying ready for me to apply the oil wash.  With drying time now becoming the limiting factor, the fiances hair dryer is out and ready to go!  More soon, HTB.



Labels:

Comments

  1. Hudson24 October 2014 at 08:40

    Two very sweet looking tanks! I salute you, sir. And good luck in AOP!

    ReplyDelete
  2. Anonymous24 October 2014 at 08:48

    Awesome looking tanks, the paint effects you have produced are outstanding.

    ReplyDelete
  3. greggles27 October 2014 at 05:51

    Beautiful tanks. Best of luck in AOP! They are just stunning works.

    I think with OSL, it always depends on what your final output is going to be. If its for a competition, extremely subtle/feathered osl is better then heavy handed. If its for tabletop, going over the top usually produces a better result!

    Really like the heat weathering and track work on these guys.

    ReplyDelete
  4. Unknown22 April 2015 at 01:52

    This comment has been removed by a blog administrator.

    ReplyDelete

Post a Comment

Popular posts from this blog

House Cadmus Imperial Knights

This post has been sat in my archive for far too long. I am not going to pretend it is new work - it has been up on my Instagram for some time but I thought I would show you some WIP photos and talk through some tips on making what is a very large project manageable. Hopefully of use to someone out there! Three Kinghts is a decent amount of work - but to be fair, you pretty much have an army once you are done.  To keep me motivated and to make the project achievable I broke it down into stages: 1. The Metal Skeletons 2. Panel Work 3. Bases 4. Weaponry. This approach will save you time and will help you get 3 Knights above table top quality quickly and efficiently. It won't feel like it as you go - but trust me when you reflect, you will have saved yourself some serious time.  There is also a uniformity you can't replicate from doing 1 then adding 2 later on... Take the pain and work in multiples....read on... 1. The Metal Skeletons: Army Painter Silver Rattle Ca
Post a Comment
Read more

Forge World Scorpion Type II – Saim-Hann

Forge World Scorpion Type II – Saim-Hann With my first project under my belt, I dug out a Forge World kit that had been left under the bed for a good number of years.  I could not ge the smooth finish I wanted so parked the model to one side, but never came back to it.  All the practicing of pre-shading, zen highlighting and shading using the Falcon kits drove me to dig it out and get it done.  This will be more step by step but do ask questions below if you want something made clearer.  Again, Buypainted! gave a vast amount of guidance and inspiration - credit where credit is due! 1.                The main hull was constructed, wing-lets, tail section etc.  The turret was also built however don’t do what I did initially and leave the pulsars sperate.  The crew and smaller weapons were mounted on old sprues to assist in painting.  The whole lot was primed us Vallejo Polyurethane Grey Primer – great stuff, and key to get the different sh
2 comments
Read more